
|
 |
| Press stone into wall mortar, rotating slightly and forcing some mortar to squeeze out at edge. |
|
SURFACE PREPARATION
Natural Thin Stone Veneer can be applied on nearly any prepared surface, including concrete, plywood, paneling, drywall and even metal.
The surface must be cleaned.
Painted surfaces must be sandblasted, or otherwise stripped of paint. If all paint is not completely removed, secure a metal lath to the wall, 6” on center.
For exterior surfaces, install a vapor barrier first, then metal lath.
For surfaces with frame construction (plywood, drywall or rigid foam), nail metal lath to wall securely, 6” on center. Apply a scratch coat (2 parts washed sand to 1 part Portland cement) to lath. Rake horizontal grooves in the scratch coat. Allow to cure. |