DownloadCatalog
 
 
accent walls & interior entryways
fireplaces, mantles, hearths
interior flooring
exterior veneer
exterior walkways & steps		 fireplaces
fire pits and built in barbeques
patios, porches
retaining walls, landscape walls
pools, pool decking, & water features
 
INSTALLING THIN STONE VENEER  
> Step 1: Tools & Materials
> Step 2: Surface Preparations
> Step 3: Application		 Download printable PDF
 

Remove excess mortar with trowel, joint tool or brush before it sets.
 
Finished Natural Thin Stone Veneer wall.

APPLICATION

1. Arrange stones to desired fit prior to installation.

2. Mix rich mortar at least 5 minutes until consistency is creamy like cake frosting
.
3. Clean veneer surfaces. Wash stone completely, if needed. Slightly dampen backside of clean stone, freeing dust and preventing moisture loss from mortar
.
4. Using trowel, apply rich mortar approximately ½” thick to wall.

5. Apply thin coat of rich mortar on backside of stone, evening surface pits and bumps for a stronger bond.

6. Press stone into wall mortar, rotating slightly and forcing some mortar to squeeze out at edges. Remove excess mortar with trowel, joint tool or brush before it sets.

7. Use a grout bag to fill joints. As mortar stiffens, tool to the desired depth and brush off all excess. Do not let any mortar harden on the face of any stone.

8. Remove excess dirt or film using clean water and stiff brush.

9. Allow project to cure for 4 weeks for inside work.

 
NOTE: These are general instructions for applying Natural Thin Stone Veneer. Processes may vary depending on application. We strongly recommend consulting with an installation professional.
All information is provided as a courtesy to those interested in natural stone, limestone quarries, building materials, quarries in the South or Southwest and more specifically in Texas, limestone suppliers, natural stone wholesale, natural stone supply and Texas limestone. Salado Quarries makes no warranties regarding the accuracy of the information. All information is from sources deemed reliable, but is not guaranteed by Salado Quarries located in Florence, TX. We urge independent verification of each and every item submitted to the satisfaction of those interested in the limestone quarry. It is every potential client’s sole responsibility to accomplish his or her due diligence in whatever manner he or she deems advisable.